1.Plug for glassfibre racing seat. This is actually my old seat that I have made narrower by cutting out about one inch from the middle and then putting it together again. The seat was made by a mould "from behind", whichmeans I have to make the same kind of mould to make good copies. However, the maker of this specific seat was probably either 1) drunk or 2) very inattentive, as it is full of small pockets of air as well as pores. All these have to be filled so filler, sanding, filling, sanding etc . This is after the first stage, where I have filled the holes from the seat belts.
|
